Are
these kits nontoxic & safe? The only material that comes in contact with your skin during the Clone A Willy molding process is a seaweed based molding material that's commonly used by dentists to produce detailed impressions of teeth. The molding material IS NOT plaster of paris, which carries health hazards. Plaster is typically exothermic (heat releasing) which can potentially cause burns as well as not be nearly as efficient for molding. Your finished dildo is made from a proprietary skin-like substance that is not latex or silicone, but a completely safe, non porous rubber-like material that is non-allergenic & nontoxic. It's currently being used throughout Hollywood to create incredibly lifelike special effects. Unlike silicone, it WILL NOT break down when used with water-based OR silicone-based lubricants. Are
there allergy concerns? "The material that comes into contact with the skin is a seaweed based powder that is commonly used as a food additive. It should pose no health or allergy concerns whatsoever." What
are the main differences in the kits? Clone
Kits = Single Kits without Testicles Can
I buy extra materials separately? Can you make a mold of the inside of a woman's vagina or is it just the outside? You can only make a mold of a woman's labia (outer lips). Currently there is no safe way to make a mold of the mucous membrane that lines the vaginal walls. Even porn star sex toys are not the actual inside of their vagina. It is only the outside of the labia. There is no company that makes such a product and we strongly urge you not to try something like that on your own or you may very well end up in an emergency room or experience serious health issues. It is perfectly safe to use the Clone A Pussy kit as instructed and those kits have made thousands of successful molds using nontoxic materials for many happy women. What problems may arise? The majority
of customers get a perfect mold with no problem. However, when customers
do have problems it tends to be that they perceive that the molding
powder is gelling too fast. We've found that if we tell people to
insert earlier, they have to leave it in longer and therefore risk
losing their erection. The way the molding powder is formulated,
it's a physical and chemical impossibility for the powder to gel
more quickly than what we indicate. It has always been found to
be a user error and is determined to be that the water & powder
ratios are off, or that the water temperature is not accurate. It
is important to be sure to allow adequate time for your thermometer
to get an accurate reading. The manufacturer has recommended for
more time you can try using cooler water (as cool as 60 Degrees
F). Literally thousands of trials have been performed on the Molding
Powder contained in the kits, and gel time for the Clone A Willy
Kits is consistently over 2 minutes and for Make Your Own Dildo
Kits, consistently over 3.5 mins. Water hardness (General & Carbonate
hardness) will not affect gel time, nor will ambient pressure (altitude). Why is the tube on the Make Your Own Dildo Kits not filled to the top when you add all the molding material? It's not supposed to be full. Your penis and scrotum should displace some of the gel, thus, filling the tube & partially filling the scrotum container. Squeezing the tube should fill the remainder of the scrotum container. My molding powder gelled too quickly, what did I do wrong? It may be that the ratios were not measured correctly. That is VERY important. When measuring out the powder, do not shake or tap the tube to even it out as the powder will compress and throw off the ratios. The powder should be poured light and fluffy. If properly mixed there should be exactly enough molding powder for two attempts for the Make Your Own Dildo Kits (one attempt for the Clone A Willy and Clone A Pussy). What are the differences in preparation between the Clone A Willy & Make Your Own Kits? Clone A Willy Kits use 98 degree water and requires 2 minutes of setting time before it begins gelling. Make Your Own Dildo Kits use 75 degree water and requires 3.5 minutes work time. Reason being, the MYOD Kits are better designed for someone attempting this alone. A guy will have time to mix the molding gel, pour it into the tube, and still have 1.5 minutes to get an erection before he needs to put it in. With Clone A Willy, you have to insert right away and works better if a partner can mix & pour. How do I extend the life of my penis mold for future castings? If taken care of properly, your mold can yield 4-5 casts. To extend the life of your mold, fill it with water and leave it at room temperature (out of the sun). Always be careful when removing a casted dildo so that you do not break or crack the mold. Does pubic hair matter? If the directions are followed properly you can make a kit with or without pubic hair. However, some customers have said that when they went past the recommended time in the directions some of the mixture dried in their pubic hair and they found it difficult to get out. What happens if my dildo turned out sticky? The most likely reason for stickiness is incorrect rubber ratios. The ideal mixture is 50% clear and 50% dark liquid by WEIGHT. Too much clear liquid will typically cause stickiness whereas too much colored liquid will usually make your dildo a bit harder, but it won't make it sticky. What happens if there are air bubbles in my dildo? Pits or bumps on your dildo are typically the result of too much water in the mold. This can be resolved by letting the mold dry for 24 hours before filling it with your liquid rubber mixture. What if my penis is too big to fit in the molding tube? The molding tube will accommodate about 7.5 inches circumference in girth and 11 inches in length. If you do not fit you are certainly unique! Let us know and we can have a special molding container mailed to you. You will also need special directions which we will also send. If your penis is over 9 inches, you can purchase a larger vibrator to displace more rubber in the Clone A WIlly Kit. See our Extra Ingredients page for purchasing one. How
big of a penis can be made with the kits?
Why size isn't often an issue in the Clone A Willy- The Clone A Willy comes in a 11 x 2 ½ inch clear plastic tube where the man will insert his penis. Unless you have a 12 inch penis that’s more than 2 ½ inches in diameter, you should not need a larger kit.
Can I use cock rings with the kit? Using rings is actually a good idea. We highly recommend using a thin one so as not to interfere with making the mold of your penis. Make sure to see our Accessories page for the ones we most recommend. Can I change the color of the dildo? YES. You will be provided with flesh colored paint in your kit that mixes with the rubber, but some of our customers like to be a little more creative and wanted to know about the use of other colors. According to the manufacturer, you can add other colors... before you pour in the liquid rubber, simply mix in a tiny dab of any oil-based color. A very small amount will completely change the color, giving you unlimited color options. You can even make your dildo multiple colors. Winsor & Newton oil based paint works well and is available at many of your local art stores. You can go to the Winsor & Newton site to find a location near you. A tube is approximately $4 and we have heard from customers who use purple that it adds a blood engorged penis look. When using paint you only want to use a dab and while an oil based paint should be safe, please note there are no studies to show that it is safe to use in in a dildo at this time and thus you should proceed with adding paint or anything else at your own risk. Once cured, the rubber compound should safely encompass the oil color, but we still recommend using a condom for internal use when using anything other than just the kits as they come. Can I mold other body parts such as a breast, vagina, anus, or my whole body? That is a commonly asked question. Generally the answer is no, but upon special request we may consider providing materials for such endeavors. Here is what you should know- Entire Body Molding Kit- Approximate cost- $4500.00 Making a rubber mold of your entire body is not too difficult but it is really expensive and requires an appropriate molding vessel in order to do it. A large bathtub can work but a 55 gallon drum works better. We do not recommend attempting to mold the head with the body or closing off air passage ways for breathing. For more information you will need to contact us.
What
if it does not mold the way I want it?
Although you probably won't need it, each penis (make a dildo) kit comes with enough molding material for 2 attempts (except the Clone A Willy single application kits as noted above, which can be purchased with an added plaster kit). According to the manufacturer, each mold can be used to make up to 5 dildos (additional liquid rubber is necessary to make more than 1 finished dildo). Can
I mold my penis fully erect? What if I have genital piercings? The manufacturer recommends removing piercings prior to making the mold. Particularly if the jewelry is large or a hoop design, it can become stuck in the mold and create distortions in the finished replica (not to mention that it might be uncomfortable to remove from the mold). The mold usually replicates the hole left by the piercing with enough detail that jewelry can actually be added to the finished dildo. We also recommend cleaning the area around the piercing before and after making the mold. While
making the mold, will I have to wait until my penis gets 'soft' again
before I can remove it? What's
the difference between the Make Your Own Dildo standard and the vibrating
kit?
The vibrating Make Your Own Dildo Kit comes with a tiny, high-powered vibrating egg that you simply drop into the rubber before it cures. It adds a whole new dimension to your dildo! Are the Make Your Own Dildo or a Clone A Willy Kits Harness Compatible? You can actually make the Clone A Willy kit Vac-U-Lock compatible by removing the vibrator from the finished replica. It will be stubborn, but once it's finally removed, the cavity left in its place is almost exactly the size of the Vac-U-Lock plug. It obviously won't vibrate, but you will have a harness ready replica. With the Make Your Own Dildo kit, you can simply insert the Vac-U-Lock plug into the liquid rubber while it is still in a liquid state and allow the rubber to cure around it (just make sure you don't want to use that particular plug again since this will be a permanent alteration). The Vac-U-Lock plug should allow your dildo to work with an O-ring style harness in addition to Vac-U-Lock harnesses.
Do
you have the instructions available online as I lost mine-
|
|
Sex
Toys | Gift
Cards & Instant eGift Cards | Sexual
Health Articles | Erotic Stories
| Rewards Program | Orders
& Shipping | Refer Our Site
|
